Skip to main content

Arbutus Hardwood Floors

The hardwood flooring installation process explained: prep, acclimation, nail down vs glue down vs floating, timelines, and costs for Calgary homes.

Most Used Hardwood Flooring Species in Calgary

Written by Arbutus Hardwood Flooring Team | Reviewed by Dave Cunnings, Lead Flooring Specialist

The hardwood flooring installation process is about more than laying boards. Most of the work that decides whether a floor lasts happens before the first plank goes down: checking the subfloor, testing for moisture, and letting the wood adjust to your home. Skipping those steps is why some new floors gap, cup, or squeak within a year.

Quick answer: A hardwood installation usually follows eight stages: assessment and measuring, subfloor prep, wood acclimation, layout, installation by nailing, gluing, or floating, finishing, trim and transitions, and final cleanup. A typical main floor takes a few days for prefinished wood, and longer if the floors are sanded and finished on site. The method depends on your subfloor and the product you choose.

Here’s what happens at each stage, how the three installation methods compare, and what to ask before you hire anyone.

Hardwood flooring installation process at a glance

Stage

What happens

Why it matters

1. Assessment

Measure, check subfloor, choose product

Avoids surprises and wrong materials

2. Subfloor prep

Level, clean, repair, test moisture

A flat, dry base prevents squeaks and gaps

3. Acclimation

Wood sits in your home before install

Reduces movement after installation

4. Layout

Plan direction and starting line

Gives a straight, balanced floor

5. Installation

Nail, glue, or float the boards

Depends on subfloor and product

6. Finishing

Sand and finish on site, or use prefinished

Sets the look and protection

7. Trim and transitions

Baseboards, thresholds, stair nosing

Gives a finished edge

8. Cleanup and care

Final check and care instructions

Protects your new floor

Step 1: Assessment and measuring

A good installation starts with a visit. The installer measures the space, checks the subfloor, and talks through the product and layout with you.

Expect to cover:

  • Square footage and room shapes
  • Subfloor type, such as plywood, OSB, or concrete
  • Existing flooring that needs removing
  • Stairs, closets, and transitions
  • Species, width, and finish options

Orders include extra material for cuts and waste. A common allowance is around 5 to 10 percent for straight layouts, and more for diagonal or herringbone patterns. Your installer will give you a number that fits your job.

Step 2: Subfloor preparation

Subfloor

This is the stage people underestimate most. A hardwood floor is only as good as what’s under it.

The installer will check that the subfloor is:

  • Flat. Dips and high spots can cause squeaks, gaps, and uneven boards.
  • Clean and solid. Loose panels or debris need fixing.
  • Dry. Moisture is the biggest threat to a new floor.
  • Properly structured. Nail-down floors need a suitable wood subfloor.

Concrete slabs need moisture testing before installation. We cover that in our guide to hardwood floors in a basement, since below-grade spaces carry the most risk. Industry bodies like the National Wood Flooring Association publish installation guidelines, and a professional should follow them.

Step 3: Acclimation

Wood takes on and gives off moisture until it matches the air around it. If it’s installed before that settles, it can move after installation, causing gaps or cupping.

Acclimation means the boards sit in the home, in the rooms where they’ll be installed, with normal heating and humidity in place. How long depends on the product, the species, and your home’s conditions. Your installer or the manufacturer will give you a guideline, and some products need little or none.

Pro Tip: Ask your installer to mix boards from several cartons as they lay the floor. Wood varies in color and grain from box to box, and blending them gives a more natural, even look.

In Calgary, our dry winters make this step especially important. A floor installed in a house with very low humidity may gap more in its first winter. We explain what’s normal in our guide on hardwood floor gaps in Calgary winters, and acclimation done right helps reduce it.

Step 4: Layout and direction

Before nailing or gluing, the installer plans the floor.

  • Direction. Boards often run along the longest wall or toward the main light source. On nail-down floors, they typically run across the floor joists. Your installer will recommend what works for your home.
  • Starting line. The first row sets the whole floor, so it needs to be straight.
  • Expansion gap. A small gap is left around the edges so the floor can move with humidity. Baseboards and trim cover it.
  • Visual balance. Planning how the last rows will look avoids thin slivers in a doorway.

Step 5: Installation methods

Installation methods

 

There are three main ways to install hardwood.

Nail down

Boards are fastened to a wood subfloor with a flooring nailer, usually through the tongue at an angle so the nail is hidden. It’s the classic method for solid hardwood and it feels solid underfoot.

  • Best for: Solid hardwood over plywood or similar subfloors
  • Needs: A suitable wood subfloor
  • Not ideal for: Concrete slabs

Glue down

Boards are bonded to the subfloor with adhesive made for flooring. It’s common over concrete and for some engineered products.

  • Best for: Engineered hardwood over concrete or other flat subfloors
  • Needs: A very flat, clean, dry subfloor and the right adhesive
  • Watch for: Messy work and longer prep

Floating

Boards click or lock together and rest on top of an underlayment, without being fastened to the subfloor. This is mostly for engineered products.

  • Best for: Engineered hardwood, quick installs, and some basement situations
  • Needs: A flat subfloor and proper underlayment
  • Watch for: Can feel less solid than nailed or glued floors

Nail down vs glue down vs floating

 

Nail down

Glue down

Floating

Typical labor cost per sq ft

$3 to $6

$4 to $7

$3 to $5

Common products

Solid hardwood

Engineered, some solid

Engineered

Subfloor

Wood

Concrete or wood

Most flat subfloors

Feel underfoot

Very solid

Very solid

Can feel hollow

Repair and replace

Straightforward

Harder

Planks can be lifted

These are rough Calgary estimates for labor only. Materials, removal of old flooring, and subfloor work are extra. For full pricing, see our hardwood flooring cost guide.

Does hardwood need underlayment

It depends on the method and the subfloor.

  • Nail down over wood: Often uses a moisture-retarding paper or felt layer
  • Glue down: Usually none, because the adhesive is the bond, though some adhesives act as a moisture barrier
  • Floating: Needs an underlayment that suits the product
  • Over concrete: Often needs added moisture protection

Always follow the manufacturer’s instructions, since using the wrong product can void a warranty.

Step 6: Finishing

Finished Hardwood Floor

There are two paths.

Prefinished hardwood arrives sanded and coated at the factory. It’s installed, and the floor is ready for use soon after. It’s faster and creates less mess.

Unfinished hardwood is installed, then sanded, stained if you want, and finished on site. It takes longer, but it gives a smooth surface across seams and lets you choose any color. It also uses the same process as hardwood floor refinishing, so the floor can be refreshed in the same way later.

If you want a particular species, width, or pattern, our custom hardwood flooring service can help.

Step 7: Trim, transitions, and stairs

Once the floor is down, the finishing details go in.

  • Baseboards and quarter-round cover the expansion gap
  • Thresholds and reducers handle changes in floor height
  • Stair nosing and treads need careful fitting
  • Vent covers are cut or replaced to fit

These details have a big effect on how professional the floor looks.

Step 8: Final check and care

A good installer walks through the floor with you, checks for loose boards or gaps, and gives care instructions. Expect to hear about:

  • How long to stay off the floor
  • When furniture and rugs can go back
  • Cleaning products to use and avoid
  • Humidity levels to maintain, roughly 30 to 50 percent
  • Felt pads on furniture legs

How long does hardwood flooring installation take

These timelines are rough and vary with the project.

Project

Typical timeline

Single room, prefinished

1 to 2 days

Main floor, prefinished

2 to 5 days

Main floor, sand and finish on site

5 to 10 days

Full home with stairs

1 to 3 weeks

Removal of old flooring, subfloor repair, and drying time can add days. Ask your installer for a realistic schedule.

Installing before or after cabinets

Opinions differ, so ask your contractor. Many installers prefer to put cabinets in first and run the hardwood up to them, which saves material and cost. Others install first in some cases, especially with site-finished floors, to get a continuous surface. What matters is a clear plan, so appliances, toe kicks, and trim fit properly.

Calgary considerations

Dry winters. Plan acclimation and humidity control carefully, and consider whether fall or spring suits your project.

New construction. In growing areas like Mahogany, Seton, Panorama Hills, and Airdrie, new homes can have high moisture from building materials. Installers often wait until the home has settled and humidity is stable.

Older homes. In neighborhoods like Inglewood and Bridgeland, subfloors may be uneven or have surprises under old coverings. Expect some prep work.

Mistakes to avoid

  • Skipping moisture testing. Especially on concrete.
  • Rushing acclimation. It’s tempting when you want the floor done.
  • Choosing the cheapest bid without checking what’s included. Prep work often gets left out.
  • Using the wrong method for the subfloor. It can cause failure.
  • Forgetting expansion gaps. Boards need room to move.
  • Ignoring humidity afterward. A new floor still needs a stable environment.

If problems show up after installation, such as gaps, squeaks, or lifting boards, early attention keeps repairs smaller. Our hardwood floor repair service can assess them.

Getting your installation right

The hardwood flooring installation process rewards patience. A proper assessment, subfloor prep, acclimation, and the right method for your home do more for your floor than any product choice. Ask questions at each stage and choose an installer who explains their process.

If you’re planning new floors, contact Arbutus Hardwood for a free assessment in Calgary, Airdrie, Cochrane, Okotoks, Chestermere, or nearby. We’ll check your subfloor, explain your options, and give you a clear quote. You can also read about our hardwood floor installation service in full.

Why Wood Species Selection Matters for Calgary Homes

Selecting the right hardwood species is not just a design choice it directly impacts how your flooring performs for years to come. Calgary’s climate creates conditions where wood movement is unavoidable, making it essential to choose a species that can handle these fluctuations without compromising stability.

Each wood type has different levels of density, flexibility, and grain structure. These characteristics determine how resistant the flooring will be to dents, scratches, and seasonal expansion. Homeowners who understand these differences can avoid costly repairs and ensure their flooring maintains both its function and appearance over time.

Durability Differences
Grain Behavior
Moisture Response
When these factors are

carefully considered the result is a floor that not only looks great but also performs reliably in everyday living conditions. Ignoring them often leads to premature wear or dissatisfaction even with high quality materials.

Climate Considerations for Hardwood Flooring in Calgary

Calgary’s dry winters and fluctuating humidity levels make it one of the more challenging environments for hardwood flooring. Wood naturally reacts to moisture, and in a climate where indoor air can become extremely dry, this reaction becomes more noticeable.

Seasonal contraction during winter can create small gaps between planks and summer humidity may cause expansion. These changes are normal, but choosing the right species and installation approach can significantly reduce their impact.

Stable Wood Species
Proper Acclimation
Controlled Indoor Humidity
Proper planning plays a major role in long term performance.

Allowing the wood to acclimate before installation and maintaining consistent indoor humidity levels can prevent many common issues.

Oak Hardwood Flooring

Oak hardwood flooring remains the most popular choice in Calgary due to its exceptional balance of durability, affordability, and design flexibility. It has been widely used for decades and continues to perform reliably in both modern and traditional homes.

One of the key advantages of oak is its strong and visible grain pattern. This natural texture helps conceal everyday wear such as scratches and minor dents, that makes it highly practical for busy households. Unlike smoother woods, oak maintains its appearance even after years of use.

Strong Durability
Visible Grain Texture
Stain Flexibility

Oak is also highly adaptable when it comes to finishing. It accepts stains evenly that allow homeowners to achieve a wide variety of looks without compromising the natural beauty of the wood. Because of this versatility oak remains one of the safest and most recommended choices for Calgary homes.

Maple Hardwood Flooring

Maple hardwood flooring is known for its clean, smooth appearance and subtle grain pattern. It is often chosen for modern interiors where a more uniform and refined look is desired. Compared to oak, maple offers a more contemporary aesthetic that works well in minimalist spaces.

In terms of performance, maple is harder than many other domestic species which makes it resistant to dents and surface wear. However, it is slightly more sensitive to humidity changes, meaning proper installation and environmental control are essential.

High Hardness
Smooth Grain
Modern Appearance

Because of its strength and sleek look, maple is a strong choice for homeowners who want durability without a pronounced grain pattern

Ash Hardwood Flooring

Ash hardwood flooring offers a unique combination of strength and visual character. It is similar to oak in durability but features a more pronounced and dynamic grain pattern, which gives it a distinct appearance.

Its lighter tone makes it ideal for creating bright and open spaces, especially in modern Calgary homes where natural light is a key design element. Ash also provides a level of flexibility that helps it absorb impact better than more rigid species.

Strong Structure
Bold Grain Pattern
Light Color Tones

This combination of durability and visual appeal makes ash a versatile option for homeowners who want something slightly different from traditional oak

Walnut Hardwood Flooring

Walnut hardwood flooring is widely recognized for its rich, dark tones and luxurious finish. It adds depth and warmth to interiors, making it a preferred choice for high end residential spaces.

Although walnut is softer than oak or hickory, its aesthetic value often outweighs this limitation. It performs best in areas with moderate foot traffic, where its appearance can be preserved without excessive wear.

deep color
smooth texture
premium look

For homeowners focused on elegance and design, walnut delivers a level of sophistication that few other species can match. When used in the right setting, it becomes a standout feature in any room

Hickory Hardwood Flooring

Hickory hardwood flooring is one of the toughest domestic options available. Its high density provides excellent resistance to dents, scratches, and heavy foot traffic.

Visually, hickory stands out due to its dramatic color variation and bold grain patterns. This gives it a more rustic and natural look compared to more uniform species like maple.

Extreme Hardness
High Durability
Strong Visual Contrast

Because of its strength hickory is particularly well suited for homes with pets, children, or high daily usage. It is a long term solution for homeowners who prioritize durability above all else.

Cherry Hardwood Flooring

Cherry hardwood flooring is known for its warm, reddish tones that deepen over time. This natural aging process enhances its appearance that gives it a richer and more refined look as the years go by.

While it is softer than many other hardwoods, cherry is valued more for its aesthetic qualities than its durability. It is best suited for areas where foot traffic is limited.

Warm Tones
Smooth Grain
Natural Aging

Cherry is often chosen for formal spaces where elegance and character are more important than heavy duty performance.

Mahogany Wood Floors

Mahogany wood floors are associated with luxury and high end interior design. They feature a fine, even grain and deep color tones that create a sophisticated and polished look.

Mahogany offers moderate hardness and performs well when properly maintained. Its consistent texture gives it a refined appearance that works well in upscale environments.

Rich Color
Fine Grain
Elegant Finish

This species is often selected for statement spaces where visual impact is a priority. It provides a classic, upscale feel that enhances the overall design of a home

Pine Wood Flooring

Pine wood flooring is a softer option that offers a rustic and natural appearance. It features visible knots and grain variations that give it a more casual and lived in look. Because it is softer, pine is more prone to dents and marks. However, many homeowners appreciate this as it adds character over time.

Soft Texture
Rustic Look
Natural Knots

Pine is ideal for farmhouse style or cottage inspired interiors where imperfections contribute to the overall charm of the space.

Ipe Wood Flooring

Ipe wood flooring is an exotic hardwood known for its exceptional durability and resistance to environmental factors. It is significantly harder than most domestic species and performs extremely well under heavy use. Its density also makes it resistant to moisture, insects, and general wear, that makes it a long lasting investment.

Extreme Density
High Resistance
Long Lifespan

Although it is more expensive and harder to install, ipe offers unmatched durability for homeowners looking for a premium solution

Teak Wood Flooring

Teak wood flooring is another premium option valued for its natural oils and moisture resistance. It performs well in environments where humidity changes are common, that features make it a reliable choice. Its warm tones and smooth texture create a welcoming and high end appearance.

Natural Oils and
Moisture Resistance
Premium Finish

Teak is often used in luxury applications where both performance and aesthetics are equally important.

Best Hardwood Flooring Species for High Traffic Areas

Choosing the right species for high traffic areas is essential for maintaining the appearance of your flooring over time. Durability becomes the primary factor in these spaces.

Hickory Hardwood Flooring
Oak Hardwood Flooring
Maple Hardwood Flooring

These species offer the best resistance to wear and are capable of handling daily use without showing significant damage. Selecting one of these options ensures your flooring remains in good condition even in busy households.

Cost Comparison of Different Wood Species

Understanding cost differences helps homeowners make better long term decisions. While initial pricing varies, durability and maintenance also affect overall value.

Budget Friendly: Pine, Ash
Mid Range: Oak, Maple
Premium: Walnut, Cherry
Luxury: Ipe, Teak

Mid range options are the most common because they provide a strong balance between cost and performance. Higher end species are typically chosen for their visual appeal and exclusivity rather than practicality alone.

Common Mistakes When Choosing Hardwood Flooring

Many homeowners overlook key factors when selecting hardwood flooring, which can lead to long term issues. Avoiding these mistakes can save both time and money.

Choosing Based On Looks Only
Ignoring Climate Impact
Overlooking Maintenance Needs
Skipping Professional Installation

Making informed decisions ensures your flooring performs as expected and maintains its appearance over time. Proper planning and expert guidance play a crucial role in achieving the best results

Cost Comparison of Different Wood Species

Understanding cost differences helps homeowners make better long term decisions. While initial pricing varies, durability and maintenance also affect overall value.

Budget Friendly: Pine, Ash
Mid Range: Oak, Maple
Premium: Walnut, Cherry
Luxury: Ipe, Teak

Mid range options are the most common because they provide a strong balance between cost and performance. Higher end species are typically chosen for their visual appeal and exclusivity rather than practicality alone.

It's possible on a simple, small project, but mistakes are costly. Subfloor prep, layout, and the right fastening method are easy to get wrong. Many homeowners hire a professional for a full floor.

Prefinished floors can often be walked on right away or soon after. Site-finished floors need drying and curing time first, and your installer will give exact guidance.

Often yes. The carpet and underlay definitely come out. Some hard surfaces may stay in place depending on the product, but it needs professional assessment.

There isn't one best method. Nail down suits solid wood over a wood subfloor, glue down suits concrete and some engineered products, and floating suits many engineered floors.

Should you refinish hardwood floors before selling your house?

Should you refinish hardwood floors before selling your house?

Should you refinish hardwood floors before selling your house? Should you refinish hardwood floors before selling your house? See when it’s worth it, what it costs, how long it takes, and what buyers notice in Calgary. Contact Us Most Used Hardwood Flooring Species in Calgary If you’re about to list…

Hardwood flooring installation process: what happens, step by step

Hardwood flooring installation process: what happens, step by step

Hardwood flooring installation process The hardwood flooring installation process explained: prep, acclimation, nail down vs glue down vs floating, timelines, and costs for Calgary homes. Contact Us Most Used Hardwood Flooring Species in Calgary Written by Arbutus Hardwood Flooring Team | Reviewed by Dave Cunnings, Lead Flooring Specialist The hardwood…

Hardwood vs LVP, laminate and carpet: which is best for Calgary homes?

Hardwood vs LVP, laminate and carpet: which is best for Calgary homes?

Hardwood vs LVP, laminate and carpet: which is best for Calgary homes? Hardwood vs LVP, laminate, carpet, and tile: compare cost, lifespan, and resale for Calgary homes, and find out where each one makes sense. Contact Us Most Used Hardwood Flooring Species in Calgary Written by Arbutus Hardwood Flooring Team…

Need Help in Hardwood Floor Installation?

Choosing the right hardwood flooring species is one of the most important steps in creating a durable and visually appealing home. Calgary’s climate requires careful consideration, making it essential to select a species that can handle environmental changes without compromising performance. If you’re planning to install hardwood flooring contact us today to get the best results from your investment.

    Hardwood flooring installation process: what happens, step by step 3