Hardwood floor refinishing cost Calgary usually runs between $3 and $6 per square foot for a full sand and refinish, and about $1.50 to $3.50 per square foot for a lighter screen and recoat. For a typical 1,000 square foot main floor, that works out to roughly $3,000 to $6,000 for a full refinish.
That’s a wide range, and the reason is simple. Two floors of the same size can need very different amounts of work. A floor with light wear is a quick job. A floor with deep scratches, pet stains, and an old finish that needs stripping takes much more time.
Quick answer: Expect about $3 to $6 per square foot to sand and refinish hardwood floors in Calgary, plus $1 to $2 more per square foot if you’re changing the stain color. A recoat for floors that only need a fresh finish costs less. Your final price depends on square footage, floor condition, finish type, stairs, repairs, and add-ons like dustless sanding.
Here’s what drives the price, what’s usually included, and how to compare quotes fairly. All figures are estimates, not quotes, and your price depends on your floor.
Hardwood floor refinishing cost in Calgary per square foot
| Job | Typical cost per sq ft | What it includes |
| Screen and recoat | $1.50 to $3.50 | Light abrasion and a fresh coat of finish |
| Sand and refinish | $3 to $6 | Sanding to bare wood and new protective finish |
| Sand, restain, and refinish | $4 to $8 | Sanding, new stain color, and finish |
| Dustless sanding upgrade | Adds $0.50 to $1.50 | Dust-containing sanding equipment |
People search for this in many ways: how much to restore, redo, resurface, or re-sand hardwood floors. Those usually mean the same thing, a full sand and refinish, so the same price range applies. If someone says “polish,” they often mean a recoat or maintenance coat, which sits at the lower end.
Refinishing cost by home size
These examples use the ranges above. Your actual quote will vary.
| Floor area | Screen and recoat | Sand and refinish | Sand, restain, and refinish |
| 500 sq ft | $750 to $1,750 | $1,500 to $3,000 | $2,000 to $4,000 |
| 1,000 sq ft | $1,500 to $3,500 | $3,000 to $6,000 | $4,000 to $8,000 |
| 1,500 sq ft | $2,250 to $5,250 | $4,500 to $9,000 | $6,000 to $12,000 |
| 2,000 sq ft | $3,000 to $7,000 | $6,000 to $12,000 | $8,000 to $16,000 |
Larger jobs often cost less per square foot because setup time is spread across more floor. Very small jobs can cost more per square foot, since contractors have a minimum charge to cover travel and equipment.
What affects the cost of refinishing hardwood floors
Pro Tip: When you compare quotes, ask each contractor exactly what’s included: edging and corners, moving furniture, the number of finish coats, and cleanup. A low quote that leaves these out often ends up costing the same or more.
Square footage. More floor means more time, sandpaper, and finish.
Floor condition. Deep scratches, gouges, pet stains, or heavy wear take more passes with the sander and sometimes board repair.
Wood species. Hard species like maple and hickory can take longer to sand than softer woods.
Finish type. Water-based finishes often cost a little more than oil-based ones, and they dry faster and have less odor. Premium finishes with extra durability cost more again.
Number of coats. Three coats cost more than two, but give more protection on busy floors.
Stain color. Changing the color adds labor and material. Natural finish is cheaper.
Stairs. These are usually priced separately, often per step, because they take more hand work.
Repairs. Replacing damaged boards, filling gaps, or fixing squeaks adds to the total.
Carpet removal. Removing carpet, underlay, and tack strips is extra if your hardwood is under carpet.
Dustless sanding. This adds a modest amount, but it keeps fine dust out of your home, which matters if you’re living there during the work.
Add-on costs to ask about
| Add-on | Typical cost |
| Dustless sanding | $0.50 to $1.50 per sq ft |
| Custom stain or color change | $1 to $2 per sq ft |
| Water-based, low-odor finish | $0.50 to $1 per sq ft |
| Single board replacement | $50 to $150 per board |
| Spot repair (scratch, gouge) | $200 to $500 per spot |
| Furniture moving | Often quoted separately |
| Carpet removal | Quoted by area |
| Stairs | Often priced per step |
Cost to restain hardwood floors
Changing the color of your floor is a full refinishing job, because the old stain has to be sanded out first. That’s why restaining costs more than a standard refinish. Plan on roughly $1 to $2 per square foot more than a standard sand and refinish.
Going darker is usually more predictable than going lighter, and results depend on your wood species. We explain the process, and what’s realistic, in our guide on staining hardwood floors a different color.
Recoat vs full refinish: which is cheaper
A recoat costs about half as much as a full refinish, but it only works when the wood is in good shape and the finish is just worn or dull. It won’t fix deep scratches, stains, or a color you don’t like.
If your floor has scratches that go into the wood, or the finish is worn to bare wood in places, a recoat won’t last, and you’ll end up paying for sanding anyway. Our comparison of screen and recoat vs sand and refinish helps you decide which one your floor needs before you ask for a quote.
Is refinishing cheaper than replacing hardwood floors
Almost always, yes, as long as the wood is sound.
| Option | Typical cost per sq ft |
| Screen and recoat | $1.50 to $3.50 |
| Sand and refinish | $3 to $6 |
| New hardwood, installed | $8 to $22 |
Refinishing typically costs a third or less of replacement for the same area. Replacement only makes sense when boards are badly warped, water damage runs deep, or the floor has been sanded too many times to sand again. For a wider look at what every flooring job costs, see our hardwood flooring cost guide.
What a refinishing quote should include
A good written quote should tell you:
- The square footage and areas covered, including stairs and closets
- Whether the job is a recoat, a sand and refinish, or a restain
- The type of finish and number of coats
- Whether dustless sanding is included
- How repairs and damaged boards are handled
- Whether furniture moving and carpet removal are included
- The timeline, including drying and cure time
- Payment terms and any warranty
If a quote is much lower than the others, ask why. It often means fewer coats, skipped prep, or items left out.
How to save money on refinishing
- Choose the right job. Don’t pay for sanding if a recoat will do, and don’t pay for a recoat if the floor needs sanding.
- Combine rooms. Doing the whole main floor at once usually costs less per square foot.
- Move small items yourself. Clear rooms before the crew arrives, if the contractor agrees.
- Keep the natural color. Staining adds cost.
- Fix small problems early. Minor repairs now prevent larger bills later.
- Book ahead. Spring and fall can fill up, so planning early gives you more choice.
- Maintain the finish. A recoat every few years can delay a full sanding for a long time.
Calgary factors that affect cost and timing
Dry winters. Heating season dries out indoor air, and finishes need good ventilation while they cure. Fall is a popular time to book so floors are ready before winter.
Older homes. In neighborhoods like Inglewood and Bridgeland, original floors often have decades of wear, odd subfloors, and sometimes layers of old finish or paint. These jobs can take longer and cost more.
Newer builds. In areas like Mahogany, Seton, and Panorama Hills, floors are often only a few years old. A recoat is often enough, which keeps the cost lower.
Surrounding areas. We also serve Airdrie, Cochrane, Okotoks, Chestermere, and nearby communities. A job outside the city may include a travel charge, so ask upfront.
Finish systems also differ in how they perform and how long they take to cure. Finish makers like Bona publish technical details on their products, and your contractor should be able to explain which system they use and why.
How long does refinishing take
| Project | Typical time |
| Screen and recoat | 1 to 2 days |
| Sand and refinish, one room | 2 to 3 days |
| Sand and refinish, main floor | 4 to 7 days |
| Drying and curing | Extra days before furniture and rugs return |
Longer timelines can mean added labor cost, especially if repairs or stairs are involved.
Frequently asked questions
How much does it cost to refinish a 500 square foot floor?
Roughly $1,500 to $3,000 for a sand and refinish, and a bit less for a recoat. A small floor may also carry a minimum charge.
How much does it cost to remove carpet and refinish hardwood floors?
You’ll pay for the refinishing plus carpet and underlay removal, which is usually quoted separately. Floors under carpet can also have staples, glue, or stains, so a quick inspection helps give an accurate number.
Is it worth refinishing hardwood floors?
Usually yes. Refinishing costs far less than replacing, can make an old floor look new, and keeps the original wood in place.
Does refinishing cost more if I have pets?
It can, if there are pet stains or deep scratches that need repair. Heavy damage may mean replacing a few boards before the finish goes on.
How much does it cost to refinish hardwood stairs?
Stairs are usually priced per step or as a separate line item, because they require more hand work. Ask for it to be listed clearly in your quote.
Do I pay more for dustless sanding?
Usually a small amount extra. Many homeowners find it worthwhile, especially when living in the house during the work.
Getting an accurate hardwood floor refinishing cost Calgary
Hardwood floor refinishing cost in Calgary depends on your floor, not an average. The best way to get a real number is a short visit where someone checks the wood, the finish, and any repairs. A good contractor will tell you plainly whether you need a recoat, a full refinish, or a repair first, and put it in writing.
If you’d like an honest assessment and a clear quote, contact Arbutus Hardwood for a free estimate in Calgary, Airdrie, Cochrane, Okotoks, Chestermere, or nearby. You can also see our full hardwood floor refinishing service for how we work.

